Skip to main content
European Commission logo
Research and Innovation

Insulating a green future with aerogel eco-panels

Around 40% of EU energy consumption and 36% of its CO2 emissions come from buildings. EU-funded researchers have developed easy-to-install eco-panels to place on the outside of the buildings to dramatically cut both.

© IPN, 2019

PDF Basket

No article selected

Making Europe carbon-neutral by 2050 is no easy task, especially when its ageing buildings, many of them poorly insulated, waste massive amounts of energy. By some estimates, up to 110 million buildings in Europe need renovation when it comes to energy.

To address this enormous challenge, the EU-funded GELCLAD project has created cost-effective, easy-to-install eco-panels that can fit on the outside of buildings.

‘While the EU’s building stock is quite old, averaging 35 % over 50 years old, it is also quite energy inefficient, meaning that buildings should be regarded as a critical pathway towards the decarbonisation goals set for 2050,’ says GELCLAD project coordinator Jorge Corker of the Instituto Pedro Nunes in Portugal.

The Aerogel handshake

The deep renovation of even 3 % of the building stock would generate energy savings of approximately 100 terawatt hours per year (TWh/y). Increase it to 20 % by 2030 and it could save some 750 TWh/y, a European Parliament report shows. To put that into perspective, France’s yearly nuclear energy production is approximately 400 TWh/y.

In an effort to help meet the EU climate objectives, GELCLAD researchers designed a smart modular cladding panel made of advanced nano-insulation materials, weatherproofed recycled polymers, plastic foams and wood biopolymer composites.

‘The product is intended to be a ready-to-use and easy-to-install one, while superiorly capable of complying with the latest and strictest building energy-efficiency requirements,’ says Corker, noting it will last for more than 30 years. The facade panel includes an aerogel material that surpasses the performance of conventional insulations by around 45 %.

Some 100 tests were needed before the project team came up with a successful skin frame system. And it took more than 70 formulations processed by a ground-breaking extrusion technique at industrial-pilot scale before GELCLAD found its foamable and extrudable aerogel nanomaterial.

The result is a panel that can be applied to old buildings as well as new ones, with the advantage of being a modular all-in-one superior insulation.

Better insulation, more jobs

Given the scale of the challenge, the project also sought to cut the production cost of the nanotechnology-driven aerogel foam material by a third and maintenance and installation expenses by 65 % over typical systems.

Reducing such costs is key to rolling out a system in an energy renovation market that was worth some EUR 109 billion in 2015, providing almost 900 000 jobs.

‘Three different pilots in the UK, Slovenia and Germany have been successfully set up representing various industrial solutions accomplished at a full scale, towards future market demand,’ says Corker.

He adds, citing a conservative assumption, that should GELCLAD penetrate just 0.5 % of the exterior insulation facade systems market in the first years of commercialisation, it might represent a 60 000 m2/year market share. It is one step, among many, towards greening the future.

PDF Basket

No article selected

Project details

Project acronym
GELCLAD
Project number
723425
Project coordinator: Portugal
Project participants:
Germany
Portugal
Slovenia
Spain
United Kingdom
Total cost
€ 5 538 847
EU Contribution
€ 4 791 708
Project duration
-

See also

More information about project GELCLAD

All success stories

This story in other languages